Compare

Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove Read more Remove
YMD 1500
Type Brushes Single Phase
Model OHV Forced Air 4 stroke
Voltage Regulate Capacitor
Max AC output 1.0 KVA / 1.2 KVA
Rated AC Output 0.9 KVA / 0.95 KVA
Displacement 87 ml
Max Output 1.8 HP / 3000 rpm
Fuel tank 15 litre
Ignition system T.C.I
starting system Recoil / Electric start
Noise level 62 db ( A)
Dimension 545 x 425 x 440 mm
Gross Weight 31 kg
Net Weight 30 kg
YMD 3500
Type Brushes Single Phase
Model OHV Forced Air 4 stroke
Voltage Regulate AVR Capacitor
Max AC output 3.2 KVA / 3.5 KVA
Rated AC Output 2.7 KVA / 3.0 KVA
Displacement 196 ml
Max Output 6.5 HP / 3600 rpm
Fuel tank 15 litre
Oil Capacity 0.6
Ignition system T.C.I
starting system Recoil / Electric start
Noise level 67 db ( A)
Dimension 600 x 450 x 470 mm
Gross Weight 44.5 kg
Net Weight 42.5 kg
Model rpm Ratios kw/rpm(ps/rpm 1800rpm 2100rpm mm KN KG

FD06

 1000-2100 

2.52 3.05  3.50        0.0044(0.006)  8(11)  9(13)   124   1.8   62 
Main Specification of Generator Sets
Genset Continous model C20 C30 C45 C68 C77 C91 C104
Model Standby model C22S C33S C50S C75S C85S C100S C114S
Continous output (kw/kva) 20/25 30/37.5 45/56 68/85 77/96 91/114 104/130
Standby output (kw/kva) 22/27.5 33/41.25 50/63 75/94 85/106 100/125 114/143

 

TECHNICAL DATA
DIESEL ENGINE MODEL 4B3.9-G2 4BT3.9-G2 4BTA3.9-G2 6BT5.9-G2 6BT5.9-G2 6BTA5.9-G2 6BTAA5.9-G2
Engine Characters Water-cooled, In line, 4-stroke, Direct injection, Wet cylinder liner, 1500 rpm
Constant Output(KW) 24 36 50 92 92 110 120
Standby Output(KW) 27 40 55 100 100 120 132
Aspiration Naturally Turbo Turbo & After-cooled Turbo Turbo & After-cooled
Bore(mm) x Stroke(mm) 102 x 120
Cubic Capacity (Liters) 3.91 5.9
Compression Ratio 16.5:1 17.5:1
Cooling System Volume(L) 8 11 31 17
Max. Water Temperature 100°C
Speed Characteristics The speed stability bandwidth ≤ +0.25%. The steady governing rate ≤ 1%
Fuel Consumption ≤ 215g/kW.h ≤220g/kW.h
Lube Consumption (prime) ≤ 1.36g/kW.h
Radiated Heat to Ambient (KWm) 6 6 8 14 N/A N/A
Heat Rejection to Coolant(KWm 27 27 29 62 N/A N/A
Heat rejection to Exhaust(KWm) 38 38 41 69 N/A N/A
Fan Cooling Air Flow(m3/h) 6790 7470
Intake Air Flow(I/s) 52 52 52 94 N/A N/A
Exhaust Gas Flow(m3/h) 572 601 612 840 1020 1302 1352
Exhaust Temperature (°C) 480 492 502 510 576 524 541
Exhaust Back Pressure 10kPa(Maximum)
ALTERNATOR MODEL SPT22S SPT30S SPT48S SPT68S SPT80S SPT91S SPT112S
Continuous Output(KW/KVA) 22/275 30/37.5 48/60 68/85 80/100 91/114 112/140
Power Efficiency 81% 90% 88.6% 90.2% 90.4% 90.8% 91.7%
Voltage Regulation ±1.0% with 4% engine governing
Waveform Distortion No load ≤1.5% and non-distorting balanced linear load ≤5%
THF/TIF <2% / <50
Fan Cooling Air Flow(I/s) 216 514

 

 

Main Specification of Generator Sets
Genset Continous model C140 C160 C200 C250 C280
Model Standby model C160S C176S C220S C275S C310S
Continous output (kw/kva) 140/175 160/200 200/250 250/313 280/350
Standby output (kw/kva) 160/200 176/220 220/275 275/344 310/388

 

 

TECHNICAL DATA
DIESEL ENGINE MODEL 6CTA8.3-G2 6CTAA8.3G-2 NTA855-G1 NTA855-G2 NTA855-G4
Engine Characters Water-cooled, In line, 4-stroke, Direct injection, Wet cylinder liner, 1500 rpm
Constant Output(KW) 163 183 240 283 317
Standby Output(KW) 180 205 265 321 351
Aspiration Turbocharged & Aftercooled
Bore(mm) x Stroke(mm) 114 x 135 140 x 152
Cubic Capacity (Liters) 8.3 14
Piston Speed(m/s) 6.75 7.6
Compression Ratio 17.0:1 15:1
Cooling System Volume(L) 12.3 51
Max. Water Temperature 100°C
Speed Characteristics The speed stability bandwidth ≤ +0.25%. The steady governing rate ≤ 1%
Fuel Consumption ≤ 210g/kW.h
Lube Consumption (prime) ≤ 1.36g/kW.h
Radiated Heat to Ambient (KWm) 24 42 46
Heat Rejection to Coolant(KWm 88 167 187
Heat rejection to Exhaust(KWm) 127 208 212
Fan Cooling Air Flow(m3/h) 19980 29380 29448
Intake Air Flow(I/s) 163 375 408
Exhaust Gas Flow(m3/h) 1850 3550 4060
Exhaust Temperature (°C) 638 4850C 5410C
Exhaust Back Pressure 10kPa(Maximum)
ALTERNATOR MODEL SPT140S SPT160S SPT200S SPT260S SPT304S
Continuous Output(KW/KVA) 140/175 160/200 200/250 260/325 304/380
Power Efficiency 92.5% 93.3% 92% 93% 92.6%
Voltage Regulation ±1.0% with 4% engine governing
Waveform Distortion No load ≤1.5% and non-distorting balanced linear load ≤5%
THF/TIF <2% / <50
Fan Cooling Air Flow(I/s) 514 486

 

Main Specification of Generator Sets
Genset Continous model C300 C360 C400 C500 C600 C800
Model Standby model C330S C400S C440S C565S C670S C900S
Continous output (kw/kva) 300/375 360/450 400/500 512/640 600/750 800/1000
Standby output (kw/kva) 330/413 400/500 440/550 565/706 670/838 900/1125

 

TECHNICAL DATA
DIESEL ENGINE MODEL KTA19-G2 KTA19-G3 KTA19-G4 KTAA19-G7 KTA38-G2 KTA38-G5
Engine Characters Water-cooled, In line, 4-stroke, Direct injection, Wet cylinder liner, 1500 rpm
Constant Output(KW) 336 403 448 610 664 880
Standby Output(KW) 369 448 503 650 731 970
Aspiration Turbocharged & Aftercooled
Bore(mm) x Stroke(mm) 159 x 159
Cubic Capacity (Liters) 19 38
Piston Speed(m/s) 7.9
Compression Ratio 14.5:1 13:1 13.9:1
Cooling System Volume(L) 91 196 202
Max. Water Temperature 100°C
Speed Characteristics The speed stability bandwidth ≤ +0.25%. The steady governing rate ≤ 1%
Fuel Consumption ≤ 215g/kW.h
Lube Consumption (prime) ≤ 1.36g/kW.h
Radiated Heat to Ambient (KWm) 50 58 64 78 101 125
Heat Rejection to Coolant(KWm 206 247 240 265 407 539
Heat rejection to Exhaust(KWm) 239 263 319 356 511 544
Fan Cooling Air Flow(m3/h) 29448 35280 103957 109530
Intake Air Flow(I/s) 432 486 532 680 850 1140
Exhaust Gas Flow(m3/h) 4298 4842 5162 6524 8632 10983
Exhaust Temperature (°C) 524 528 510 541 499
Exhaust Back Pressure 10kPa(Maximum) 6.7kPa(Max.)
ALTERNATOR MODEL SPT304S SPT360S SPT400S SPT536S SPT600S SPT800S
Continuous Output(KW/KVA) 304/380 360/450 400/500 536/670 600/750 800/1000
Power Efficiency 92.6% 93.8% 94.1% 94.9% 93.7% 94.7%
Voltage Regulation ±1.0% with 4% engine governing
Waveform Distortion No load ≤1.5% and non-distorting balanced linear load ≤5%
THF/TIF <2% / <50
Fan Cooling Air Flow(I/s) 486 1035 1614

 

Air Cooled Generator Sets Water Cooled Generator Sets
Genset

Continous Model

D20

D30 D40 D48 D24W D40W D48W D75W D100W D120W
Model Standby model D22S D33S D44S D53S D24WS D40WS D48WS D75WS D100WS D120WS
 Continous output (kw/kva) 20/25 30/38 40/50 48/60 25/31.3 40/50 48/60 75/94 100/120 120/150
Standby output (kw/kva) 22/28 33/41 44/55 52.8/66 27.5/34.3 44/55 52.8/66 82/102.5 110/132 132/165

 

TECHNICAL DATA
DIESEL ENGINE MODEL FL3L912 F4L912 F6L912 F6L913 D226B-3D TD226B-3D TD226B-4D TD226B-6D TBD226B-6D TD226B-6D
Engine Characters Vertical type, 4-stroke, air-cooled, direct injeciton, 1500 rpm Water-cooled, in-line, 4-stroke, humid cylinder liner, direct injection, 1500 rpm
Constant Output (KW) 24 32 48 51 30 45 60 90 120 132
Standby Output (KW) 26 35 52 54 33 49.5 66 99 132 145.2
Aspiration Naturally Naturally Turbo charged Turbo charged
Bore (mm) x Stroke (mm) 100 x 120 105 x 120
Cubic Capacity (Liters) 2.8 3.8 5.7 6.1 3.12 4.16 6.23
Compression Ratio 17:1 18:1
Speed Characteristics The speed stability bandwith < + 0.25% the steady governing rate <1%
Fuel Consumption (g/KW.h) ≤ 215 ≤ 218 ≤ 221 ≤ 234 ≤ 208 ≤ 205
Lube Consumption (prime) ≤ 1.36g / kW.h ≤ 145g / kW.h
ALTERNATOR MODEL SPT22S SPT255S SPT405S SPT485S SPT25S SPT40S SPT48S SPT80S SPT112S SPT128S
Continuous Output (KW/KVA) 22/28 30/38 40/50 48/60 25/31.3 40/50 48/60 80/100 112/140 128/160
Power Efficiency 90% 90% 90% 90% 91% 90.6% 91.2% 90.1% 90% 90%
Voltage Regulation ± 1.0% with 4% engine governing
Waveform Distortion No load < 1.5% and non-distorting balanced linear load < 5%
THF/TIF <2% / <50

 

DIESEL GENERATING SETS

Model Generator

Alternator

Prime Power (kW/kVA) Voltage (V) Current (A) Frequency (Hz) P.F Type Power (kW) L x W x H (cm) (Kg)
D160 160/200 400 316 50 0.8 TBD234V6 191 271 x 113 x 171 2960 SPT160S
D200 200/250 361 TBD234V6 223 271 x 113 x 171 2960 SPT200S
D250 250/312.5 451 TBD234V8 281 302 x 113 x 171 3250 SPT260S
D300 300/375 541 TBD234V8 328 326 x 112 x 171 3400 SPT304S
D360 360/450 649 TBD234V12 402 417 x 132 x 202 4900 SPT360S
D400 400/500 722 TBD234V12 444 417 x 132 x 202 5300 SPT400S
D500 500/625 902 TBD604BL6 564 453 x 151 x 216 5600 SPT480S
D640 640/800 1137 TBD620V8 750 483 x 172 x 232 8270 SPT640S
D750 750/940 1353 TBD620V8 829 483 x 172 x 232 8330 SPT720S
D800 800/1000 1443 TBD620V8 880 483 x 172 x 232 8500 SPT800S
D1000 1000/1520 1804 TBD620V12 1128 531 x 172 x 232 10200 SPT1000S
D1100 1100/1375 1985 TBD620V12 1251 531 x 172 x 232 10650 SPT1120S
D1200 1200/1500 2165 TBD620V12 1320 541 x 172 x 232 10800 SPT1240S
D1500 1500/1875 2706 TBD620V16 1760 604 x 172 x 232 13950 SPT1620S
D1700 1700/2125 3067 TBD620V16 1844 609 x 172 x 232 14370 SPT1760S

Dimension : 800x350x440 mm

Weight : 25 kg

Plunger no.& dia & stroke : 3x22x16

Pressure : 20-35 kg/cm2

Suction : 14-22 L/min

Speed : 800-1200 rpm

Power : 168F

TECHNICAL DATA (50 HZ)

Generator Set

Model

Prime Standby

Perkins Diesel

Model

Alternator Model
KW KVA KW KVA
PE 7 7.2 9 8 10 403C-11G SPT8.8S
PE 10 10.4 13 11.2 14 403C-15G SPT10.8S
PE 16 16 20 17.6 22 404C-22G SPT18S
PE 24 24 30 26.4 33 1103A-33G SPT25S
PE 36 36 45 40 50 1103A-33TG1 SPT40S
PE 48 48 60 52.8 66 1103A-33TG2 SPT48S
PE 52 52 65 57.2 71.5 1104A-44TG1 SPT58S
PE 64 64 80 70.4 88 1104A-44TG2 SPT68S
PE 80 80 100 88 110 1006TG2A SPT80S
PE 108 108 135 120 150 1006TAG SPT112S
PE 120 120 150 132 165 1006TAG2 SPT128S
PE 144 144 180 160 200 1106C-E66TAG4 SPT160S
PE 200 200 250 220 275 1306C-E87TAG6 SPT180S
PE 240 240 300 280 350 2306C-E14TAG1 SPT260S
PE 280 280 350 320 400 2306C-E14TAG2 SPT304S
PE 320 320 400 360 450 2306C-E14TAG3 SPT304S
PE 364 364 455 400 500 2506C-E15TAG1 SPT360S
PE 400 400 500 440 550 2506C-E15TAG2 SPT400S
PE 480 480 600 528 660 2806C-E18TAG1 SPT480S
PE 520 520 650 560 700 2806C-E18TAG2 SPT536S
PE 584 584 730 640 800 4006-23TAG2A SPT600S
PE 640 640 800 720 900 4006-23TAG3A SPT640S
PE 720 720 900 792 990 4008TAG2A SPT720S
PE 800 800 1000 880 1100 4008TAG2A SPT800S
PE 1000 1000 1250 1100 1375 4012-46TWG2A SPT1000S
PE 1200 1200 1500 1320 1650 4012-46TAG2A SPT1240S
PE 1460 1460 1825 1600 2000 4016TAG1 SPT1620S
PE 1600 1600 2000 1760 2200 4016TAG2 SPT1120

 

TECHNICAL DATA (60 HZ)

Generator Set

Model

Prime Standby

Perkins Diesel

Model

Alternator Model
KW KVA KW KVA
PE8-6 8 10 8.8 11 403C-11G  SPT6.5S
PE13-6 13 16.25 14 18 403C-15G  SPT10.8S
PE18-6 18 22 19 24 404C-22G  SPT18S
PE23-6 23 28.7 25 31.5 404C-22TG  SPT18S
PE27-6 27 33 29 36 1103A-33G  SPT22S
PE40-6 40 50 44 55 1103A-33TG1  SPT32S
PE42-6 42 52.5 46 57.7 1103A-33TG1  SPT34S
PE50-6 50 62.5 55 68.7 1103A-33TG2  SPT40S
PE55-6 55 68 60 75 1103A-33TG2  SPT48S
PE74-6 74 92.5 81 102 1104A-33TG2  SPT68S
PE90-6 90 112.5 99 124 104AC-44TAG2  SPT80S
PE124-6 124 155 135 169 1006TAG  SPT112S
PE185-6 185 231 204 254 1306C-E87TAG3  SPT160S
PE274-6 274 343 302 377 2306C-E14TAG1  SPT236S
PE315-6 315 393.7 346 433 2306C-E14TAG2  SPT260S
PE352-6 352 440 387 484 2306C-E14TAG3  SPT304S
PE410-6 410 512 451 564 2506C-E15TAG3  SPT360S
PE456-6 456 570 502 627 2506C-E15TAG4  SPT400S
PE510-6 510 637.5 561 701 2806C-E18TAG1  SPT480S
PE552-6 552 690 607 759 2806C-E18TAG3  SPT480S
PE600-6 600 750 660 825 4006C-23TAG2A  SPT536S
PE680-6 680 850 748 935 4006C-23TAG3A  SPT640S
GENERAL Model SRG - 1150 DN / SRG - 1250DN
Material housing ABS Plastic
Strobe light 20times per minute (min. 0.75 candela)
temperature operating -20°C ~ +55°C
battery Lithium - 4 years service life
Operating life

48 hours at - 20 °C

80 hours at +20°C

Transmission time 440 ms ±1 %
Repetition 50 s ±5%
Weight 1,5 kg
TRANSMITTER Frequency

406.025 MHz ±2ppm

Output power

5W±2dB

Radio type

G1B

Modulation Phase modulation 1.1 ± 0.1 rad
Data encoding Bi phase L
Biratre 400 b/s
Antenna Onmidirectional whip antenna
  • GENERATOR
  •  
Model YMD1200DC YMD1300DC
Type Brushless, Single-phase
Voltage Regulate Capacitor
Frequency (Hz) 50/60 50/60
Max.AC Output (KVA) 0.5/0.65 0.7/0.95
Rated AC Voltage (V) 110 . 120 . 220 . 230 . 240
Rated AC Output (KVA) 0.45/0.55 0.65/0.8
Power Faktor cos = 1
 ENGINE

Model YMD/GX145
  Type Forced Air-cooled 2-stroke
  1. BorexStroke (mm x inch)
45x40/2.13x15.2
Compression ratio 7.4:1
Ignition System C.D.I
Starting System


Recoil and hand-operated/Electric start
Fuel tank capacity(L/gal) 4/1.1

OPTIONAL

FEATURES

DC Output As requestment
DC Circuit Breaker As requestment
Pilot Ligth As requestment

 PACKAGE

DIMENSIONS

Net Weight (kg/lbs) 20.5/45.1
Gross Weight (kg/lbs) 22.5/49.5
20/40FT unit 630/1260

Spesifikasi :

Type Brushes Single Phase
Model OHV Forced Air 4 Stroke
Voltage Regulate AVR/ Capasitor
Max AC output (kva) 1/ 1.2
Rated AC output (kva) 0.9/ 0.95
Displacement (ml) 87
Max Output (HP/rpm) 1.8/ 3000

Fuel Tank (litre)

5
Oil Capacity 0.6
Ignition System TCI
Starting System Recoil/ Electric Start
Noise Level (dB A) 62
Dimension (mm) 545x425x440
Gross Weight 31
Net Weight 30
Main Specification of Generator Sets
Genset Continous model P22 P25 P30 P34 P36 P40 P48 P56
Model Standby model P24S P27S P33S P37S P44S P44S P52S P61S
Continous output (kw/kva) 22/30 25/33 30/38 34/42 36/45 40/50 48/60 56/70
Standby Output (kw/kva) 24/32 27/35 33/41 37/46 40/50 44/55 52/65 61/76

 

TECHNICAL DATA
DIESEL ENGINE MODEL 1003G 1003G 1003TG 1003TG 1004G 1004G 1004G 1004TG 1004TG 1004TG
Engine Characters Water-cooled, In line, 3-cylinders, 4-stroke, Direct injection, Wet cylinder liner, 1500 rpm Water-cooled, In line, 4-cylinders, 4-stroke, Direct Injection, Dry cylinder liner, 1500 rpm
Constant Output (KW) 28 40 40 65.7
Standby Output (KW) 30.8 44 44 72.3
Aspiration Natural Turbo Charged Natural Turbo Charged
Bore(mm) x Stroke(mm) 100 x 127
Cubic Capacity (Liters) 3.99 3.99 3.99 3.99
Piston Speed (m/s) 6.35 6.35 6.35
Compression Ratio 16.5:1 17.5:1 16.0:1 16.0:1
Stability Bandwidth ≤ ± 0.8 % ≤ ± 0.8 % ≤ ± 0.8 %
Steady Governing Rate ≤ 5% ≤ 5% ≤ 5%
Accoustic Pressure ≤ 91.5dBA ( At full load, 1m distance) ≤ 91.2dBA ( At full load, 1m distance) ≤ 91.2dBA ( At full load, 1m distance)
Exhaust Temperature. °C 600 600 561
Exhaust Back PRESSURE 6KPa 5KPa 6KPa
Air Induction System Dry element type with back pressure warning indication
Lube Temperature / Capacity 125 °C/8.1L(Max.)
BMEP:kPA (Prime Power) 617 882 882 1369
Heat Rejection to Exhaust 25 kW/min 35.7 kW/min

35.7 kW/min 53.4 kW/min
Heat Rejection to Cooling 27 kW/min 38 kW/min 38 kW/min 43.kW/min
Cooling System Volume   17  L 21 L 22.2 L  
Cooling Air Flow 55 m3 / min 55 m3 / min 100 m3 / min
Combustion Air Flow     2.64 m3 / min 55 m3 / min    4.52 m3 / min
Exhaust Gas Flow 7.54 m3 / min 7.54 m3 / min  13.1 m3 / min
Min. Fuel Consumption  ≤ 210 g/ kW.h    ≤ 210 g/ kW.h  ≤ 205 g/ kW.h   
Lube Consumption   ≤ 2g/ kW.h  ≤ 210 g/ kW.h  ≤ 205 g/ kW.h 
ALTERNATOR MODEL SPT22S SPT25S SPT30S SPT32S SPT30S SPT34S SPT40S SPT40S SPT48S SPT58S
Continuous Output (KW/KVA)  30/37.5 25/31 30/37.5 34/42.5 30/37.5 34/42.5 40/45 40/45 48/60 58/72.5
Power Efficiency 85.8% 86.6% 86.6% 87% 86.6% 87% 88.2% 88.2% 88.6% 90%
Voltage Regulation     ± 1.0% with 4% engine governing     
Waveform Distortion     No load < 1.5% and non-distorting balanced linear load < 5%     
THF / TIF < 2% / < 50

 

 

Main Specification of Generator Sets
Genset Continous model P68 P72 P80 P91 P108
Model Standby model P75S P80S P88S P100S P120S
Continous output (kw/kva) 68/85 72/90 80/100 91/114 108/135
Standby Output (kw/kva) 75/94 80/100 88/110 100/125 120/150

 

 

TECHNICAL DATA
DIESEL ENGINE MODEL 1006TG1A 1006TG1A 1006TG2A 1006TAG 1006TAG
Engine Characters Water-cooled, In line, 6-cylinders, 4-stroke, Direct injection, Dry cylinder liner, 1500 rpm
Constant Output (KW) 84.3 92.3 121
Standby Output (KW) 92.7 102 134
Aspiration Turbo Charged Turbo Charged Turbo Charged and Aftercooled
Bore(mm) x Stroke(mm) 100 x 127 100 x 127 100 x 127
Cubic Capacity (Liters) 5.99 5.99 5.99
Piston Speed (m/s) 6.35 6.35 6.35
Compression Ratio 16:1 16:1 17:1
Stability Bandwidth ≤ ± 0.8 % ≤ ± 0.8 % ≤ ± 0.25 %
Steady Governing Rate ≤ 5% ≤ 5% ≤ 1%
Accoustic Pressure ≤ 92.1dBA ( At full load, 1m distance) ≤ 94.3dBA ≤ 94.9dBA
Exhaust Temperature. °C 545 550 571
Exhaust Back PRESSURE 6KPa 6KPa 6KPa
Air Induction System Dry element type with back pressure warning indication
Lube Temperature / Capacity 125 °C/16.1L(Max.) 125 °C/19L(Max.)
BMEP:kPA (Prime Power) 1283 1404 1964
Heat Rejection to Exhaust 59.1 kW/min 66.5 kW/min 115 kW/min
Heat Rejection to Cooling 56 kW/min 63 kW/min 65.5 kW/min
Cooling System Volume  27.7  L  27.7  L 37.2 L
Cooling Air Flow 135 m3 / min 135 m3 / min 154 m3 / min
Combustion Air Flow  5.74 m3 / min  5.74 m3 / min 8.38  m3 / min
Exhaust Gas Flow 15.56 m3 / min 16.24 m3 / min 24.14 m3 / min 
Min. Fuel Consumption  ≤ 205 g/ kW.h
Lube Consumption   ≤ 1.36g/ kW.h 
ALTERNATOR MODEL SPT68S SPT80S SPT80S SPT91S SPT112S
Continuous Output (KW/KVA)  68/85 80/100 80/100 91/114 112/140
Power Efficiency 90.2% 90.4% 90.4% 90.8% 91.7%
Voltage Regulation     ± 1.0% with 4% engine governing     
Waveform Distortion     No load < 1.5% and non-distorting balanced linear load < 5%     
THF / TIF < 2% / < 50
  YMD 2500
Type Brushes Single Phase
Model OHV Forced Air 4 stroke
Voltage Regulate AVR Capacitor
Max AC output 2.2 KVA / 2.5 KVA
Rated AC Output 2.0 KVA / 2.2 KVA
Displacement 163 ml
Max Output 5.5 HP / 3600 rpm
Fuel tank 15 litre
Oil Capacity 0.6
Ignition system T.C.I
starting system Recoil / Electric start
Noise level 67 db ( A)
Dimension 600 x 450 x 470 mm
Gross Weight 43.5 kg
Net Weight 40 kg