Samyung BNW-50

Bridge Navigational Watch Alarm System

More details


IMO MSC.128(75). Meets the international standard IEC 62616).
ALR (alarm) sentence output (IEC 61162) for VDR.
Responds to the other navigational equipment’s ALR (alarm) and EVE(event) sentence input.
Time display function once GPS signal is connected.
Easy to extend the function due to the availability of various options.
Function that monitors the bridge activity and detects operator disability which could lead to marine accidents
Alerts the stand-by officer when the watch officer does not responds to the visual and audible alarm.
Equipped with emergency call and navigator call button.
Automatic reset function that detects the movement of the watch officer by using the motion sensor.
Use of password protects the control of setup menu
Easy to operate since display uses numbers and graphics.



Screen size : 4.3 inch TFT color LCD, 470 x 272 pixels
Power consumption : 130mA, power save mode 70 mA (24 V DC)
Size : 129 x 183 x 113.5 mm (HxWxD)
Weight : 0.5Kg
Operation temperature : -15 ℃ ~ 55 ℃

Main power supply : 110V / 220V AC
Back-up power supply : 24V DC (for 6 hour, min 3 Ah)
Power consumption : 130mA
Size : 221 x 165 x 95 mm (HxWxD)
Weight : 1.5Kg
Operation temperature : -15 ℃ ~ 55 ℃
Interface : Inputting reset pulse by radar.
- Inputting interface of operating track controller
- Inputting NMEA data(Reset, alarm, etc)
- Inputting DC12V power supply and reset of
- motion sensor and reset unit.
- Outputting the alarm signal for reset and alarm unit.
- Outputting the NMEA data for blackbox(VDR)
- Outputting the alarm interface for machine breakdown
- Outputting the interface for the external unit’s alarm.
- Input/Output DC23V power supply and RS-232 communication for display unit.

Power consumption : max 34mA / unit (24 V DC)
Size : 126 x 90 x 30 mm (HxWxD)
Weight : 0.2Kg (flush type), 0.5Kg (desk type),0.5Kg (watertight type)
Operation temperature : -15 ℃ ~ 55 ℃
Level of water resistance : IP67(watertight type)
Level of sound : Over 75 dB
Function : Reset, visual alarm, 1st stage audible alarms are combined
(You may choose one function if you wish to).

Power consumption : max 30mA / unit (24 V DC)
Size : 126 x 90 x 30 mm (HxWxD)
Weight : 0.2Kg (flush type), 0.5Kg (desk type)
Operation temperature : -15 ℃ ~ 55 ℃
Level of sound : Over 75 dB

Power consumption : Operating = 26mA / unit ,Stand-by = 17mA / unit (12 V DC)
Detection method : Quad-element PIR and microwave pulse doppler
MW frequency: 10.525GHz
Size : 115 x 61 x 37.5 mm (HxWxD)
Weight : 120g (Bracket excluded)
Operation temperature : -15??C~ 55??C
Detective angle : 120??~150??
Detective rage : 15m (Standard)
Pre-heating time : 1 minute

No customer comments for the moment.

Only registered users can post a new comment.

30 other products in the same category:



    Copyright 2019 Semeru Teknik. All Rights Reserved